From bb0d7a555a8871724135cef65d82745734cf0990 Mon Sep 17 00:00:00 2001 From: r0r-5chach Date: Fri, 7 Jul 2023 18:34:37 +0000 Subject: [PATCH] nvidia settings; updates --- etc/default/grub | 63 ++++++++++++++++++++++++++++ etc/mkinitcpio.conf | 73 ++++++++++++++++++++++++++++++++ etc/pacman.conf | 97 +++++++++++++++++++++++++++++++++++++++++++ home/r0r5chach/.zshrc | 3 ++ 4 files changed, 236 insertions(+) create mode 100644 etc/default/grub create mode 100644 etc/mkinitcpio.conf create mode 100644 etc/pacman.conf diff --git a/etc/default/grub b/etc/default/grub new file mode 100644 index 0000000..25d5ebb --- /dev/null +++ b/etc/default/grub @@ -0,0 +1,63 @@ +# GRUB boot loader configuration + +GRUB_DEFAULT=0 +GRUB_TIMEOUT=5 +GRUB_DISTRIBUTOR="Arch" +GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 quiet nvidia_drm.modeset=1" +GRUB_CMDLINE_LINUX="" + +# Preload both GPT and MBR modules so that they are not missed +GRUB_PRELOAD_MODULES="part_gpt part_msdos" + +# Uncomment to enable booting from LUKS encrypted devices +#GRUB_ENABLE_CRYPTODISK=y + +# Set to 'countdown' or 'hidden' to change timeout behavior, +# press ESC key to display menu. +GRUB_TIMEOUT_STYLE=menu + +# Uncomment to use basic console +GRUB_TERMINAL_INPUT=console + +# Uncomment to disable graphical terminal +#GRUB_TERMINAL_OUTPUT=console + +# The resolution used on graphical terminal +# note that you can use only modes which your graphic card supports via VBE +# you can see them in real GRUB with the command `videoinfo' +GRUB_GFXMODE=auto + +# Uncomment to allow the kernel use the same resolution used by grub +GRUB_GFXPAYLOAD_LINUX=keep + +# Uncomment if you want GRUB to pass to the Linux kernel the old parameter +# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx" +#GRUB_DISABLE_LINUX_UUID=true + +# Uncomment to disable generation of recovery mode menu entries +GRUB_DISABLE_RECOVERY=true + +# Uncomment and set to the desired menu colors. Used by normal and wallpaper +# modes only. Entries specified as foreground/background. +#GRUB_COLOR_NORMAL="light-blue/black" +#GRUB_COLOR_HIGHLIGHT="light-cyan/blue" + +# Uncomment one of them for the gfx desired, a image background or a gfxtheme +#GRUB_BACKGROUND="/path/to/wallpaper" +#GRUB_THEME="/path/to/gfxtheme" + +# Uncomment to get a beep at GRUB start +#GRUB_INIT_TUNE="480 440 1" + +# Uncomment to make GRUB remember the last selection. This requires +# setting 'GRUB_DEFAULT=saved' above. +#GRUB_SAVEDEFAULT=true + +# Uncomment to disable submenus in boot menu +#GRUB_DISABLE_SUBMENU=y + +# Probing for other operating systems is disabled for security reasons. Read +# documentation on GRUB_DISABLE_OS_PROBER, if still want to enable this +# functionality install os-prober and uncomment to detect and include other +# operating systems. +#GRUB_DISABLE_OS_PROBER=false diff --git a/etc/mkinitcpio.conf b/etc/mkinitcpio.conf new file mode 100644 index 0000000..ef78db4 --- /dev/null +++ b/etc/mkinitcpio.conf @@ -0,0 +1,73 @@ +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES=(usbhid xhci_hcd) +MODULES=() + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run last, so it may be used to +# override the actual binaries included by a given hook +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES=() + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +FILES=() + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H ' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No RAID, lvm2, or encrypted root is needed. +# HOOKS=(base) +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS=(base udev autodetect modconf block filesystems fsck) +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS=(base udev modconf block filesystems fsck) +# +## This setup assembles a mdadm array with an encrypted root file system. +## Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices. +# HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck) +# +## This setup loads an lvm2 volume group. +# HOOKS=(base udev modconf block lvm2 filesystems fsck) +# +## NOTE: If you have /usr on a separate partition, you MUST include the +# usr and fsck hooks. +HOOKS=(base udev autodetect modconf keyboard keymap consolefont block filesystems fsck) + +# COMPRESSION +# Use this to compress the initramfs image. By default, zstd compression +# is used. Use 'cat' to create an uncompressed image. +#COMPRESSION="zstd" +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +#COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" +#COMPRESSION="lz4" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS=() + +# MODULES_DECOMPRESS +# Decompress kernel modules during initramfs creation. +# Enable to speedup boot process, disable to save RAM +# during early userspace. Switch (yes/no). +#MODULES_DECOMPRESS="yes" diff --git a/etc/pacman.conf b/etc/pacman.conf new file mode 100644 index 0000000..200629e --- /dev/null +++ b/etc/pacman.conf @@ -0,0 +1,97 @@ +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives + +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +#CacheDir = /var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +#GPGDir = /etc/pacman.d/gnupg/ +#HookDir = /etc/pacman.d/hooks/ +HoldPkg = pacman glibc +#XferCommand = /usr/bin/curl -L -C - -f -o %o %u +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#CleanMethod = KeepInstalled +Architecture = auto + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options +#UseSyslog +#Color +#NoProgressBar +CheckSpace +#VerbosePkgLists +#ParallelDownloads = 5 + +# By default, pacman accepts packages signed by keys that its local keyring +# trusts (see pacman-key and its man page), as well as unsigned packages. +SigLevel = Required DatabaseOptional +LocalFileSigLevel = Optional +#RemoteFileSigLevel = Required + +# NOTE: You must run `pacman-key --init` before first using pacman; the local +# keyring can then be populated with the keys of all official Arch Linux +# packagers with `pacman-key --populate archlinux`. + +# +# REPOSITORIES +# - can be defined here or included from another file +# - pacman will search repositories in the order defined here +# - local/custom mirrors can be added here or in separate files +# - repositories listed first will take precedence when packages +# have identical names, regardless of version number +# - URLs will have $repo replaced by the name of the current repo +# - URLs will have $arch replaced by the name of the architecture +# +# Repository entries are of the format: +# [repo-name] +# Server = ServerName +# Include = IncludePath +# +# The header [repo-name] is crucial - it must be present and +# uncommented to enable the repo. +# + +# The testing repositories are disabled by default. To enable, uncomment the +# repo name header and Include lines. You can add preferred servers immediately +# after the header, and they will be used before the default mirrors. + +#[core-testing] +#Include = /etc/pacman.d/mirrorlist + +[core] +Include = /etc/pacman.d/mirrorlist + +#[extra-testing] +#Include = /etc/pacman.d/mirrorlist + +[extra] +Include = /etc/pacman.d/mirrorlist + +# If you want to run 32 bit applications on your x86_64 system, +# enable the multilib repositories as required here. + +#[multilib-testing] +#Include = /etc/pacman.d/mirrorlist + +[multilib] +Include = /etc/pacman.d/mirrorlist + +# An example of a custom package repository. See the pacman manpage for +# tips on creating your own repositories. +#[custom] +#SigLevel = Optional TrustAll +#Server = file:///home/custompkgs diff --git a/home/r0r5chach/.zshrc b/home/r0r5chach/.zshrc index 36daf69..1f49931 100644 --- a/home/r0r5chach/.zshrc +++ b/home/r0r5chach/.zshrc @@ -15,6 +15,9 @@ compinit alias ls='ls --color=auto' alias grep='grep --color=auto' +# Environment Variables +export WLR_NO_HARDWARE_CURSOR=1 + # Prompt Config SUCCESS="%F{blue}ʘ‿ʘ%f" # What to display upon Command success FAIL="%F{red}⊙︿⊙%f" # What to display upon Command failure