nvidia settings; updates

etc/default/grub

@@ -0,0 +1,63 @@
+# GRUB boot loader configuration
+
+GRUB_DEFAULT=0
+GRUB_TIMEOUT=5
+GRUB_DISTRIBUTOR="Arch"
+GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 quiet nvidia_drm.modeset=1"
+GRUB_CMDLINE_LINUX=""
+
+# Preload both GPT and MBR modules so that they are not missed
+GRUB_PRELOAD_MODULES="part_gpt part_msdos"
+
+# Uncomment to enable booting from LUKS encrypted devices
+#GRUB_ENABLE_CRYPTODISK=y
+
+# Set to 'countdown' or 'hidden' to change timeout behavior,
+# press ESC key to display menu.
+GRUB_TIMEOUT_STYLE=menu
+
+# Uncomment to use basic console
+GRUB_TERMINAL_INPUT=console
+
+# Uncomment to disable graphical terminal
+#GRUB_TERMINAL_OUTPUT=console
+
+# The resolution used on graphical terminal
+# note that you can use only modes which your graphic card supports via VBE
+# you can see them in real GRUB with the command `videoinfo'
+GRUB_GFXMODE=auto
+
+# Uncomment to allow the kernel use the same resolution used by grub
+GRUB_GFXPAYLOAD_LINUX=keep
+
+# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
+# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
+#GRUB_DISABLE_LINUX_UUID=true
+
+# Uncomment to disable generation of recovery mode menu entries
+GRUB_DISABLE_RECOVERY=true
+
+# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
+# modes only.  Entries specified as foreground/background.
+#GRUB_COLOR_NORMAL="light-blue/black"
+#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
+
+# Uncomment one of them for the gfx desired, a image background or a gfxtheme
+#GRUB_BACKGROUND="/path/to/wallpaper"
+#GRUB_THEME="/path/to/gfxtheme"
+
+# Uncomment to get a beep at GRUB start
+#GRUB_INIT_TUNE="480 440 1"
+
+# Uncomment to make GRUB remember the last selection. This requires
+# setting 'GRUB_DEFAULT=saved' above.
+#GRUB_SAVEDEFAULT=true
+
+# Uncomment to disable submenus in boot menu
+#GRUB_DISABLE_SUBMENU=y
+
+# Probing for other operating systems is disabled for security reasons. Read
+# documentation on GRUB_DISABLE_OS_PROBER, if still want to enable this
+# functionality install os-prober and uncomment to detect and include other
+# operating systems.
+#GRUB_DISABLE_OS_PROBER=false

etc/mkinitcpio.conf

@@ -0,0 +1,73 @@
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES=(usbhid xhci_hcd)
+MODULES=()
+
+# BINARIES
+# This setting includes any additional binaries a given user may
+# wish into the CPIO image.  This is run last, so it may be used to
+# override the actual binaries included by a given hook
+# BINARIES are dependency parsed, so you may safely ignore libraries
+BINARIES=()
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in any way.  This is useful for config files.
+FILES=()
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+##   This setup specifies all modules in the MODULES setting above.
+##   No RAID, lvm2, or encrypted root is needed.
+#    HOOKS=(base)
+#
+##   This setup will autodetect all modules for your system and should
+##   work as a sane default
+#    HOOKS=(base udev autodetect modconf block filesystems fsck)
+#
+##   This setup will generate a 'full' image which supports most systems.
+##   No autodetection is done.
+#    HOOKS=(base udev modconf block filesystems fsck)
+#
+##   This setup assembles a mdadm array with an encrypted root file system.
+##   Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices.
+#    HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck)
+#
+##   This setup loads an lvm2 volume group.
+#    HOOKS=(base udev modconf block lvm2 filesystems fsck)
+#
+##   NOTE: If you have /usr on a separate partition, you MUST include the
+#    usr and fsck hooks.
+HOOKS=(base udev autodetect modconf keyboard keymap consolefont block filesystems fsck)
+
+# COMPRESSION
+# Use this to compress the initramfs image. By default, zstd compression
+# is used. Use 'cat' to create an uncompressed image.
+#COMPRESSION="zstd"
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
+#COMPRESSION="xz"
+#COMPRESSION="lzop"
+#COMPRESSION="lz4"
+
+# COMPRESSION_OPTIONS
+# Additional options for the compressor
+#COMPRESSION_OPTIONS=()
+
+# MODULES_DECOMPRESS
+# Decompress kernel modules during initramfs creation.
+# Enable to speedup boot process, disable to save RAM
+# during early userspace. Switch (yes/no).
+#MODULES_DECOMPRESS="yes"

etc/pacman.conf

@@ -0,0 +1,97 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#NoProgressBar
+CheckSpace
+#VerbosePkgLists
+#ParallelDownloads = 5
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[core-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+#[extra-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs

home/r0r5chach/.zshrc

@@ -15,6 +15,9 @@ compinit
 alias ls='ls --color=auto'
 alias grep='grep --color=auto'
 
+# Environment Variables
+export WLR_NO_HARDWARE_CURSOR=1
+
 # Prompt Config
 SUCCESS="%F{blue}ʘ‿ʘ%f" # What to display upon Command success
 FAIL="%F{red}⊙︿⊙%f" # What to display upon Command failure